Masterflex HANDY-700 Manuel d'instructions télécharger pdf (Page 8)

NOTE : If there are unprinted data in the memory after changing paper, The printer

Go into online mode automatically and print the remaining data 5 seconds

After closing paper cover.

3-4.Self-test.

The purpose of the self test The self test checks whether the printer has any

problems.

When the printer does not function properly, Please contact the supplier.

* The self test checks the following

+.Control circuit functions +.Software version

+. Setting parameters +. Printer quality

* Running the self test

+.Make sure the cover is closed and roll paper is installed correctly.

+.Turn on the power while pressing the FEED button. The self test begins.

+.The following contents are printed for printer current status printing.

 Version : 1.1.6

 Data bit : 8 bit

 Parity : None

 Baud rate : 9600 bps

 Handshaking : DTR

 Country : USA

 Print mode : Text(upright)

 Paper : Normal paper

 Density : 100%

 IrDA : IrDA-SIR

 Buffer size : 7000Byte

 Head volt : 7.1V

 Head temp : 23C

+ The self test automatically ends after printing on the paper.

+ The printer becomes ready to receive data from the host.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 28 29

Pas de commentaire

Masterflex HANDY-700 Manuel d'instructions Page 8